PrimaSelect PEI Ultem 1010 - 1-75mm - 500g - Natural

Marke / Kategorie: PrimaCreator

Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings.

The PrimaCreator PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the PrimaCreator PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

To make a successful PEI print there are a few things to keep in mind.
The printer must have the performance to meet the PEI filament and it should be printed with a nozzle temperature of 350-380°C. The heat bed should be set to 120-160°C and a heated chamber is important to have. It´s also very important to make sure that the printer is placed in a room where there´s hardly any draft and temperature fluctuations.
PEEK is best printed on a PEI sheet at a printing speed of 15-30 mm/s.

For further information, check the TDS

- PrimaSelect PEI Ultem 1010 - 1-75mm - 500g - Natural ist ein Artikel vom Anbieter buw. Hersteller PrimaCreator.

Weiteres aus PrimaCreator

MK8 unterschiedliche Grössen gehärtet Nozzles - 4 Stk

MK8 unterschiedliche Grössen gehärtet Nozzles - 4 Stk

MK8 Mixed Hardened Nozzle x 4

Compatible with: Creality CR-10 series, MakerBot Replicator 2, CraftBot series

1 x 0,2 mm

1 x 0,4 mm 

1 x 0,6 mm 

1 x 0,8 ...

P120 - Kabel und Sensor-Set

P120 - Kabel und Sensor-Set

P120 - Kabel und Sensor-Set

Kaufe dieses Kabel und Sensor-Set für deinen P120 3D-Drucker.

Produkteigenschaften:

  • Stromkabel, Sensorkabel und Sensor, der auf die Heizplatte auf P120 passt (V1, V2 und V3)
PrimaCreator MK10 unterschiedliche Grösse Messing Nozzle - 4 Stk

PrimaCreator MK10 unterschiedliche Grösse Messing Nozzle - 4 Stk

4 x MK10 Mixed Brass Nozzle

Compatible with: Wanhao i3, D4, D6, Qidi tech, FlashForge Dreamer, Creator, Finder, Monoprice Maker Select, Cocoon Create, Qidi Tech

1 x 0,2 mm

1 x 0,4 mm 

1 x 0,6 mm 

1 x 0,8 ...