BondTech DDG Ultimaker 2+ Extruder Kit unter Bondtech
BondTech DDG Ultimaker 2+ Extruder Kit

BondTech DDG Ultimaker 2+ Extruder Kit

Marke / Kategorie: Bondtech

The original stepper motor of the printer will be reused and the extruder will be mounted at the same position and in the same mounting holes as the factory extruder making the installation easy and fast in about 10 minutes.

E-steps needs to be updated to 311

Firmware with adjusted E-step is available for Ultimaker2+, Ultimaker2+ Extended or you can send a M-code to the printer directly to set the e-steps (more info here) under the section E-steps.

This extruder is developed together with C.Matthes in Germany

- BondTech DDG Ultimaker 2+ Extruder Kit ist ein Artikel vom Anbieter buw. Hersteller Bondtech.

Weiteres aus Bondtech

BondTech Motor Cable JST-XH6 -  JST-XH4

BondTech Motor Cable JST-XH6 - JST-XH4

This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that it follows the schematics for your application.

Controller side      Motor side
PIN 1  —————– PIN 1
PIN 2 —————– PIN 4
PIN 3 —————– PIN 3
PIN 4 —————– ...

BondTech Nema17 Pancake Stepper 22 mm

BondTech Nema17 Pancake Stepper 22 mm

Max Input current: 0.8A
Step angle: 1.8 deg.
Torque: 12 Ncm
Outputshaft diameter: 5.0 mm with flat.
Hole for mounting: 31 mm, 4xM3
Motor lenght: 22mm

BondTech Raise3D SinglelDirect upgrade

BondTech Raise3D SinglelDirect upgrade

This extruder upgrade kit for the Raise3D N1/N2/N2+ printer will replace the original feeder placed on the printhead.
It fit´s both dual and single nozzle printers.

It allows for a more reliable printing with all sorts of filaments, both stiff and ...