BondTech Creality3D CR-10S PRO Extruder Kit unter Bondtech
BondTech Creality3D CR-10S PRO Extruder Kit

BondTech Creality3D CR-10S PRO Extruder Kit

Marke / Kategorie: Bondtech

Built for the Creality3D CR-10S Pro

This extruder upgrade kit is for the Creality CR-10S PRO and will replace the original feeder. This kit contains no motor, the original motor is used.

 

Bondtech`s Dual Drive Performance

This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. It allows for a more reliable printing with all sorts of filaments, both stiff and flexible and the DualDrive system ensures that the extruder never loses grip of the filament so grinding, slipping is a thing of the past.

 

Lower Current Recommended

Due to the gearing ratio, the stepper motor can push filament with such force the Bowden tube can be extruded in case there is a clog. To avoid such damage, we recommend lowering the stepper motor Current to near half the original current. Check the Step By Step Guide that teaches users how to do it.

 

Bowden Solution

The Bowden tube is securely held in place by the 4mm industry standard integrated push-fit connector.

 

Reducing Filament Jams

There is now a near to 0,1mm gap between the Bondtech gears and SLS 3D printed housing that avoids filament to jam in there. An additional short PTFE Tube is added between the Extruder and the Filament Sensor to allow for easier filament loading and unloading.

 

SLS Printed Housing

The housing parts are professionally SLS 3D printed with polyamide for maximum strength and precision.

 

Firmware Update

The Creality3D Firmware needs to be updated in order to use this Upgrade Kit. The E-steps need to be updated to 415. Please see the installation guide on how to do it that you will find under the tab Step By Step Guide .

- BondTech Creality3D CR-10S PRO Extruder Kit ist ein Artikel vom Anbieter buw. Hersteller Bondtech.

Weiteres aus Bondtech

BondTech Drivegear Kit 2-85-3-0 mm - 8 mm

BondTech Drivegear Kit 2-85-3-0 mm - 8 mm

These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.

  • Gear set for filament size 2.85 - 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle ...
BondTech DDG Ultimaker 2+ Extruder Kit

BondTech DDG Ultimaker 2+ Extruder Kit

The original stepper motor of the printer will be reused and the extruder will be mounted at the same position and in the same mounting holes as the factory extruder making the installation easy and fast in about 10 minutes.

E-steps needs to be ...

BondTech Wanhao D6 Extruder Kit

BondTech Wanhao D6 Extruder Kit

This extruder upgrade kit for the Wanhao Duplicator 6/Monoprice duplicator 6 will replace the original feeder.

It allows for a more reliable printing with all sorts of filaments, both stiff and flexibles and the DualDrive system ensures that the ...

BondTech BMG Extruder

BondTech BMG Extruder

The Bondtech BMG utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications. Whether you require high resolution prints with small nozzles or ...