Marke / Kategorie: BCN3D
PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterised by a good balance of tensile strength and elongation at break. Its high resistance to water and chemicals makes it the material of choice for water-tight containers and protective cases.
PET-G is a versatile technical material, as easy to print as PLA, but with an improved balance of mechanical, chemical and thermal properties.
Compatibility: Find out the BCN3D printers and filaments compatibility
Good balance of strength and ductility
PET-G parts are as strong as those made with PLA but offer a better mechanical profile. PET-G is not brittle, which means that it will not snap abruptly if pulled or bended, on the contrary, it will progressively bend and stretch until reaching it maximum elongation limit of 23%.
PET-G is highly resistant to chemicals and humidity, which allows for disinfection and cleaning without losing its mechanical properties to hydroalcoholic solutions.
Use it to fast-track the manufacture of jigs and fixtures for your production chain.
PET-G is ideal for end-use parts demanding mechanical and thermal properties.
Stepper Driver for the X-axis on BCN3D Sigma R19 and Sigmax R19.
Tough PLA (Polylactic Acid) is engineered for its high impact resistance and strength, similar to those of ABS, ...
Stepper Driver for BCN3D Printers.
Used for Y, Z and E axis on BCN3D Sigma R19 and Sigmax R19, and for the X, Y and Z axis on the Epsilon W27, W50 and Sigmax D25.